FAQs

Can the film be removed without damage?
Lamin-x protective film can be easily removed without damage to the light or original paint. Upon initial application, the film can be pulled back up and reapplied numerous times if not installed correctly. The film and adhesive are forgiving enough for this. Once the film has settled (appx 48-72 hours) the product is not considered reusable. Upon removal warm the film and lift off slowly. If there is any additional adhesive left on the lens, simply rub the adhesive with isoprophyl alcohol.
Why do you sell some films uncut?
Couple of good reasons for this. Sometimes we do not have a precut kit available for your specific make or model. Examples would be older vehicles or custom lights or body panels. Applying an uncut sheet is just as easy and more forgiving. Secondly, uncut sheets do not need to be perfectly aligned to fit properly. Just cover the desired area and custom trim to fit your specifications and liking.
How do I know which bulk size film to purchase?
Measure the surface area where the film is going to be applied. Take into consideration any bends or compound curves that may need the material to bend when wrapping. Then choose the most applicable size for your need. Please contact us if you require a more custom size than what is listed. *Note: A Tailor's Tape works well when measuring for bulk film.
Are your colored films legal on headlights for street use?
Our colored films may not be legal for street use on primary lighting. An off-road disclosure is recommended. Please check your state or local laws before application. Installation of colored Lamin-x Film on your primary lights is done so at your own risk. None of our films produce a blue or red light when lit.
I just installed the film on my lights. There are still some tiny bubbles and milkiness underneath as well as creases/ripples on top of the film. What should I do?
Once the film settles any small bubbles/milkiness or application creases will disappear. Lamin-x is a breathable PVC vinyl film. Tiny air pockets will evaporate. The creases/ripples caused by application cards or your finger will smooth out once settled and warmed.
Can I comfortably install the paint protection kit myself?
Our paint protection kits include complete installation instructions, which describes the best installation method for each area/piece. We are also available to verbally assist the customer if any questions or complications arise. If you do decide not to install yourself, we can attempt to locate professional installer within your general vincinity.
What is your return policy?
All kits are custom made upon ordering. Therefore return orders may be subject to a 25% restocking fee (if headlight/fog light/tail light film) and a 35% restocking fee if paint protection film. Returned kits must be in clean, unused, original condition, packed in the original packaging, and received by Lamin-x within 30 days of receipt of merchandise. No return will be accepted without proof of purchase of date of sale. No COD or shipping charge refunds accepted. Customer must contact us prior to shipping to obtain a return authorization code. Not responsible for unauthorized returns.
What's the difference between your film and your competitors?
Numerous things make our product more appealing than others, such as:
  • Our films are impact resistant and a softened PVC vinyl film! Most competitor films are not impact resistant and are a top-coated urethane film, which makes for a very stiff and very unforgiving film.
  • Installation errors can be corrected and repaired upon installation.
  • Lamin-x is breathable for quicker curing and allows for newly applied paint to fully cure.
  • Resists yellowing with minor yearly maintenance.
  • Multiple colors and thicknesses available for multiple uses. Competitors only have clear films. No colors available.
5-year guarantee
Lamin-x Protective Films guarantees its products for five years from the date of purchase. The products are guaranteed against defective materials and workmanship, This guarantee is null and void if the products have been improperly handled or applied. Neither the seller nor the manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use or inability to use the products. If the products are not proven to conform to specifications the seller's and manufacturer's obligations shall be to replace it at no cost to the purchaser. All expressed or implied rights, warranties, guarantees, or conditions, stutory or otherwise, are excluded. The foregoing may not be altered, except by agreement signed by the buyer and seller, and is void where prohibited by law. During the three year guarantee period, you Lamin-x Protective Films product will be replaced free of charge, when proof of purchase and the defective product are returned to the seller or the manufacturer at:

Lamin-x Protective Films
5800 Appalachian Hwy
Suite 104
Blue Ridge, GA 30513