Toyota RAV4 (2019+ ) Front Emblem Cover

*Notice regarding product ID: S9970 - 2019+ Toyota RAV4 Front Emblem Overlay It has come to our recent attention that the front Toyota emblem of your 2019 and up Rav4 may also function as part of the sensor for the adaptive cruise control system for the vehicle (if so equipped with that feature). Toyota recommends that vehicles equipped with this system should not have any covering on the emblem. If your Rav4 is NOT equipped with adaptive cruise control then this notice does not impact you, and you can continue to enjoy your Lamin-x. If you choose to purchase and install the Lamin-x Emblem Cover on your Rav4 with adaptive cruise control, you will be deemed to have assumed and accepted the risk of injury to persons or property by your retaining the installed product with the knowledge that it may impair any vehicle system that employs the emblem as a sensor or as part of a safety system or safety equipment provided by the manufacturer of the vehicle.

A Lamin-x custom cut kit for your Toyota RAV4 (2019, 2020, 2021, 2022, 2023, 2024, 2025) is designed to give your car a one-of-a-kind combination of style and protection on its emblems. Our film is designed to be installed on your Toyota with minimal trimming. This Front Emblem Cover kit is available in all of our colors. For the darkest color and a full Emblem Covers look, choose our Charcoal film.

Features

• Transparent protection film that adheres to your emblem
• Great for protecting from off-roading damage
• Protects against rock damage, sand-blasting, or cloudiness
• Made in USA, 5-year warranty, industry-leading product

Read our California Prop 65 Warning

Not intended for use on adaptive cruise control or other vehicle sensor systems

FAQs

How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 1-3 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.

Can I install this myself? Yes, you can install Lamin-x yourself. These applications are normally low difficulty installations. A few applications with a 3, 4, or 5 level difficulty will require some acquired knowledge and mechanical ability in which we cannot be held accountable. Therefore installations are done at your risk. We provide you with installation instructions, tools, and website videos. If you are not comfortable with the installation, you can use our Dealer Locator to find a local installer. If you attempt the install yourself and have any questions, contact us at 706-955-0677 or help@lamin-x.com.

How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 2-4 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.

What is your warranty? We have a Five-Year Warranty on our products. If you want more information please visit our warranty page .

What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my Lamin-x installation? Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.

How do I remove the film from my paint? To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the lens surface. Any adhesive that may be left on the lens can be removed with a cleaner that is safe for use on your vehicle's exterior.

Are these films legal in my state? Our colored films may not be legal for street use on a vehicle's primary lighting, and, as such, are sold with an off-road use disclosure. Please check your state or local laws before installation. Application of colored Lamin-x film on your primary lights is done so at your own risk.

Warranty

Lamin-x Protective Films warrants its manufactured protective films against cracking, fading, turning yellow or manufacturing defects for a period of five (5) years from the date of purchase. To learn more about our warranty, visit our warranty page: Lamin-x Warranty