Acura MDX (14-16) Rear Bumper Guard

Acura MDX (2014, 2015, 2016) Rear Bumper Guard. When you load or unload something from your vehicles trunk it is very likely, at some point, that you will damage the paint on the top of your rear bumper. Paint scratches or damage on the rear bumper area is easily avoided when using this Rear Bumper Guard.

This invisible film is designed to protect your paint, but not alter the look of your car. It is 8 mils thick and has a glossy finish. The material is made right here in the USA by the world's leading paint protection manufacturers.

We custom pre-cut the kit to fit perfectly for your vehicle for easy peel and stick installation. We also include the installation tools and instructions needed to assist you with the install process. Order today!

Kit Includes

• One paint protection piece to cover your rear bumper.
• Installation tools: spray bottle, squeegee, and trim tool.
• Installation instructions

Installation

This kit is rated a 3 out of 5 difficulty. Installations with this level difficulty need a little time a patience when installing. Extra care is required to help with alignment and getting the film to lay down.

Watch our installation video for more info:

FAQs

What is the difference between Lamin-x Rear Bumper Guard kits and other products I find? Our Rear Bumper Guards are made of the exact same material with high-quality, strength, and warranty that you will find for clear bra paint protection. We focus on providing these high-quality products at a great price and with tools for you DIY customers to install them easily and successfully.

Can I install this myself? Yes, you can install Lamin-x yourself. These applications are normally low difficulty installations. A few applications with a 3, 4, or 5 level difficulty will require some acquired knowledge and mechanical ability in which we cannot be held accountable. Therefore installations are done at your risk. We provide you with installation instructions, tools, and website videos. If you are not comfortable with the installation, you can use our Dealer Locator to find a local installer. If you attempt the install yourself and have any questions, contact us at 706-955-0677 or help@lamin-x.com.

How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 2-4 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.

What is your warranty? We have a 10 year Warranty on our products. If you want more information please visit our warranty page.

What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my Lamin-x installation? Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.

How do I remove the film from my paint? To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the paint surface. Any adhesive that may be left on the paint can be removed with a cleaner that is safe for use on your vehicle's exterior. We recommend using Goo Gone or bug and tar remover.

How to I take care of the film after install? You can find information on care instructions on our maintenance care page.