Ford F-150 (2018-2020) Fuel Door Guard

Ford F-150 (2018, 2019, 2020) Fuel Door Guard. One of the most common areas on a vehicle that gets damaged is the paint on the fuel door. When you install Lamin-x Fuel Door Guard on your F-150, you'll protect the paint on your fuel door from scratches, scuffs, and chips that happen over time.

This invisible film is designed to protect your paint, but not alter the look of your car. It is 8 mils thick and has a glossy finish. The material is made right here in the USA by the world's leading paint protection manufacturers.

We custom pre-cut the kit to fit perfectly for your vehicle for easy peel and stick installation. We also include the installation tools and instructions needed to assist you with the install process. Order today!

Kit Includes

• One paint protection piece to cover your Fuel Door.
• Installation tools: spray bottle, squeegee, and trim tool.
• Installation instructions

Installation

This kit is rated a 3 out of 5 difficulty. Installations with this level difficulty need a little time a patience when installing. Extra care is required to help with alignment and getting the film to lay down.

The information below will assist you in achieving a successful and worry-free installation of this product.

Please follow the instructions provided in your kit.

FUEL DOORS WITH FLAT SURFACE

For fuel doors that are for the most part flat across the surface, your installation will be pretty standard in that you’ll align the edge of the film with the edge of the fuel door and begin to tack down the film.

FUEL DOORS WITH FINGER PULL NOTCHES

If your fuel door is designed like this, we’d encourage you to begin your installation at the top of the finger pull notch and begin adhering the film to the top of it and work your way down the sides of it to where it meets the flat part of the fuel door.

From that point, you should be able to take your cloth-wrapped squeegee and begin to tack down the film to the flatter surface.

Waiting to the end of your installation to adhere the film to the finger pull notch will likely lead to too much tension being placed on the film resulting in the film not wanting to lay down in the corners/recesses where the flat surface meets the finger pull notch.

FAQs

What is the difference between Lamin-x Fuel Door Guard kits and other products I find? Our Fuel Door Guards are made of the exact same material with high-quality, strength, and warranty that you will find for clear bra paint protection. We focus on providing these high-quality products at a great price and with tools for you DIY customers to install them easily and successfully. Can I install this myself? Yes, you can install Lamin-x yourself. These applications are normally low difficulty installations. A few applications with a 3, 4, or 5 level difficulty will require some acquired knowledge and mechanical ability in which we cannot be held accountable. Therefore installations are done at your risk. We provide you with installation instructions, tools, and website videos. If you are not comfortable with the installation, you can use our Dealer Locator to find a local installer. If you attempt the install yourself and have any questions, contact us at 706-955-0677 or help@lamin-x.com. How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 2-4 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it. What is your warranty? We have a 10 year Warranty on our products. If you want more information please visit our warranty page. What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my Lamin-x installation? Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own. How do I remove the film from my paint? To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the paint surface. Any adhesive that may be left on the paint can be removed with a cleaner that is safe for use on your vehicle's exterior. We recommend using Goo Gone or bug and tar remover. How to I take care of the film after install? You can find information on care instructions on our maintenance care page.