Find Your Product
Clear Selection
Find Your Product

Subaru WRX, STI Wagon (08-14) Custom Tail Light Covers

SKU:
S316-1
$64.95
  • Subaru WRX, STI Wagon (08-14) Custom Tail Light Covers
    Subaru WRX, STI Wagon (08-14) Custom Tail Light Covers
  • Subaru WRX, STI Wagon (08-14) Custom Tail Light Covers
  • Gunsmoke
  • Subaru WRX, STI Wagon (08-14) Custom Tail Light Covers
  • Description
    Description
    Lamin-x Subaru WRX, STI Wagon (2008, 2009, 2010, 2011, 2012, 2013, 2014) Tail Light Film Covers. If you are searching for how to tint my tail lights, then this high-quality overlay product is the perfect solution.

    Our products are made from high quality, adhesive-backed protective film that applies like an overlay directly onto the light. The films special adhesive allows for very forgiving installation. You can apply numerous times upon initial application to get it just right, and it can be easily removed in the future. Each kit is pre-cut to fit both the left and right tail lights.***Custom cut with reverse lights removed***


    Tail Light Kit Includes

    • Film for tail lights on both sides of your vehicle
    • Installation tools: spray bottle, squeegee, and trim tool.
    • Installation instructions

    Features

    • Transparent film that adheres onto your tail light
    • Glossy finish for high-quality look
    • Precut for both sides of your specific vehicle
    • Includes DIY tools and installation instructions
    • Made in USA, 5-year warranty, industry-leading product

    Read our California Prop 65 Warning

    Color Options

    Tail Light Tint Film Color Options

    • Tint: A light tint film for your tail lights that tones down the red. Adds a sleek look to your tails.
    • Gunsmoke: A medium tint for your tail lights. A darker and more bold tint that our Tint film.
    • Smoked: A medium-dark tint for your tails. Smoked has a slight brown hue compared to our Gunsmoke film.
    • Charcoal (8 mil Thickness): Charcoal is our black-out tail light option. If you want to black-out your tails, Charcoal is for you.
    • Red (8 mil Thickness): Our Red film is designed to give your tail lights a consistent red look, even if there are large clear sections.

    FAQs

    How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 1-3 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.

    Can I install this myself? Yes, you can install Lamin-x yourself. These applications are normally low difficulty installations. A few applications with a 3, 4, or 5 level difficulty will require some acquired knowledge and mechanical ability in which we cannot be held accountable. Therefore installations are done at your risk. We provide you with installation instructions, tools, and website videos. If you are not comfortable with the installation, you can use our Dealer Locator to find a local installer. If you attempt the install yourself and have any questions, contact us at 706-955-0677 or help@lamin-x.com.

    How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 2-4 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.

    What is your warranty? We have a Five-Year Warranty on our products. If you want more information please visit our warranty page .

    What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my Lamin-x installation? Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.

    How do I remove the film from my lights? To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the lens surface. Any adhesive that may be left on the lens can be removed with a cleaner that is safe for use on your vehicle's exterior.

    Are these films legal in my state? Our colored films may not be legal for street use on a vehicle's primary lighting, and, as such, are sold with an off-road use disclosure. Please check your state or local laws before installation. Application of colored Lamin-x film on your primary lights is done so at your own risk.

    Installation

    Difficulty Level:3/5 Installations with this level difficulty need a little time a patience when installing. Extra care is required to help with alignment and getting the film to lay down.

    Watch our installation video for more info:

    Installation Protection Plan

    Are you concerned about installing your Lamin-x? Now you can have reassurance with Installation Protection Plan! If you damage your Lamin-x upon installation, then you can try again with a free replacement piece! Upon purchasing this great benefit, you agree with these Terms and Conditions:

    Terms and Conditions

    1. Plan covers for replacement piece(s) equivalent up-to one complete kit.
    2. Ability to purchase Insurance only available during initial product purchase.
    3. All replacement order claims shall have a separate shipping fee.
    4. Plan applies to the original product and purchaser only. Not transferrable.
    5. Replacements must be the same part number and color options as original order.
    6. Plan does not reimburse for labor costs or time.
    View AllClose
  • Additional Information
    Additional Information
    Make:
    Subaru
    Model:
    WRX, STI
    Year Span:
    2008-2014
    View AllClose
Customer Reviews
4.2 Based on 5 Reviews
5 ★
60% 
3
4 ★
20% 
1
3 ★
0% 
0
2 ★
20% 
1
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • 1000
  • favor
  • protect
  • advice
  • imperfections
  • squeegee
  • spray bottle
  • knife
  • issues
  • experience
JO
10/11/2021
Joshua O.
United States

Awesome tail light film!

So I’ll start with what you get. The film, a knife, a small spray bottle, squeegee, and directions to install. The installation definitely takes some patience but the protect is great. I actually had very little issues with installing myself. Their directions help make it a lot easier. The hardest part is lining it all up perfectly. The tab helped a a lot as I had to pull up and shift a few times. The film is much thicker than I expected. A bit of advice from my experience. Do yourself a favor and remove the taillights to apply the film. This made my life 1000x easier. It came out really good with very few imperfections (which were my fault, not the films).

Lamin-x Subaru WRX, STI Wagon (08-14) Custom Tail Light Covers ReviewLamin-x Subaru WRX, STI Wagon (08-14) Custom Tail Light Covers ReviewLamin-x Subaru WRX, STI Wagon (08-14) Custom Tail Light Covers Review
10/12/2021

Lamin-x

Joshua, thank you for your good feedback! We appreciate you! - Ben

DL
09/24/2015
David L.

Necessary mod

Just got these installed and my car looks so much better! Forgot about the 3rd brake light so be sure to order a cover for those for consistency. Can't complain about the install since I hired a professional tint shop to do the dirty work.

RW
04/24/2015
ryan w.

Looks very clean adds strong accent to rear of car

Installation challenging but achievable for first time install YouTube videos and supplied instruction helped. Could use some more material to work with on outer lens upper part hard to stretch to fit lense perfectly. Some air bubbles still left but appear to be shrinking after a few days on their own. Supplied squeegee worked well and mister bottle but Razor knife was useless. Overall satisfied with purchase.

04/12/2018
Anonymous

STi tailight covers

2008 STi. These are decent but they are difficult to install and do not have enough overlap on the edges such that a clean fit can be made and then the excess material trimmed off.

TS
05/19/2022
Thaddeus S.
United States

2008-2014 STI hatch Custom Red Taillights.

I did the inner hatch tails pretty easily. They are not very curved. Started the Drivers side outer taillight. I got it really close but it’s a compound curve… these custom cut films are a bit short on the outer taillights for my liking. I could of used a millimeter on an edge. I’m less than amateur so it’s probably me. Just disappointed in the waste of time and money.