Toyota Camry (2018, 2019, 2020) Door Handle Cup paint protection. Do you want to protect the inside area of your door handles from fingernails or key scraping? Then protect your Door Handle Cups with our pre-cut Door Handle Cup protection film. It applies directly underneath your door handle onto the paint with our adhesive-backed invisible poly-urethane film.
Easy installation and a 5 year guaranty. Quite possibly the best investment you will make toward protecting your vehicle.
- Enough paint protection pieces to cover each door cup on your vehicle
- Spray bottle
- Installation instructions
Door Handle Cup Paint Protection Features
- Custom cut to protect for all the door cups on your vehicle
- Protects the area underneath your door handles
- Protects against scratches or scuffing
- Transparent protection film that adheres onto your paint
- 8 mils thick with high gloss, scratch resistant surface
- Includes DIY instructions and tools, Made in USA, 5-year warranty
Difficulty Level: 3/5 Installations with this level difficulty need a little time a patience when installing. Extra care is required to help with alignment and getting the film to lay down.
Watch our installation video for more info:
What is the difference between Lamin-x Door Handle Cup Guard kits and other products I find? Our Door Handle Cup guards are made of the exact same material with high-quality, strength, and warranty that you will find for clear bra paint protection. We focus on providing these high-quality products at a great price and with tools for you DIY customers to install them easily and successfully.
Can I install this myself? Yes, you can install Lamin-x yourself. These applications are normally low difficulty installations. A few applications with a 3, 4, or 5 level difficulty will require some acquired knowledge and mechanical ability in which we cannot be held accountable. Therefore installations are done at your risk. We provide you with installation instructions, tools, and website videos. If you are not comfortable with the installation, you can use our Dealer Locator to find a local installer. If you attempt the install yourself and have any questions, contact us at 706-955-0677 or email@example.com.
How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 2-4 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.
What is your warranty? We have a Five-Year Warranty on our products. If you want more information please visit our warranty page.
What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my Lamin-x installation? Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.
How do I remove the film from my paint? To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the paint surface. Any adhesive that may be left on the paint can be removed with a cleaner that is safe for use on your vehicle's exterior. We recommend using Goo Gone or bug and tar remover.
How to I take care of the film after install? You can find information on care instructions on our maintenance care page.