Use our Universal Headlight Film Covers to tint your headlights with bulk Lamin-x film. This kit is perfect for you if you want to tint your lights and also want a slightly easier installation process than our precut
Fun Fact: We created this kit for you... yes you! Ok, you can continue now.
This kit is available in 5 different colors - Clear, Tint, Gunsmoke, Yellow, and Blue. To see examples of our headlight tint colors check out our Lamin-x Color Gallery
Our protective films are made in the USA, impact-resistant, 12 mils thick, and adhesive-backed to protect your lights from cloudiness that occurs over time and road debris. The adhesive on our films are designed to be extremely forgiving. You can apply numerous times during initial application to get the installation right.
- Transparent protection film that adheres to your headlight
- Protects against rock damage, sand-blasting, or cloudiness
- Includes DIY tools and installation instructions
- Made in USA, 5-year warranty, industry-leading product
Read our California Prop 65 Warning
Not intended for use on adaptive cruise control or other vehicle sensor systems
- Clear: Clear protection film that protects from cracked lights and sandblasting.
- Tint: A lightly tinted film for headlights, tail lights, and more that allows for good visibility at night.
- Gunsmoke: An eye-catching look for any headlight, tail light, or auxiliary light.
- Yellow: Bold yellow look during the day, and excellent in off-roading and foggy conditions.
- Blue: Our Blue film looks light blue when unlit, but gives off a cool white light when lit by LEDs.
How do I know what size I need? Measure your light's height and width and add a couple of inches all around to make sure you have enough material. Use a tailor's tape to measure if you have access to it.
How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 1-3 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.
Can I install this myself? Yes, you can install Lamin-x yourself. These applications are normally low difficulty installations. A few applications with a 3, 4, or 5 level difficulty will require some acquired knowledge and mechanical ability in which we cannot be held accountable. Therefore installations are done at your risk. We provide you with installation instructions, tools, and website videos. If you are not comfortable with the installation, you can use our Dealer Locator to find a local installer. If you attempt the install yourself and have any questions, contact us at 706-955-0677 or [email protected].
How long will it take to get my Lamin-x? Precut orders are custom manufactured for you at time of ordering. Please allow 2-4 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.
What is your warranty? We have a Five-Year Warranty on our products. If you want more information please visit our warranty page .
What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my Lamin-x installation? Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.
How do I remove the film from my paint? To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the lens surface. Any adhesive that may be left on the lens can be removed with a cleaner that is safe for use on your vehicle's exterior.
Are these films legal in my state? Our colored films may not be legal for street use on a vehicle's primary lighting, and, as such, are sold with an off-road use disclosure. Please check your state or local laws before installation. Application of colored Lamin-x film on your primary lights is done so at your own risk.
Lamin-x Protective Films warrants its manufactured protective films against cracking, fading, turning yellow or manufacturing defects for a period of five (5) years from the date of purchase. To learn more about our warranty, visit our warranty page: Lamin-x Warranty