Blog

Hey everyone Lucas at Lamin-x. Today I will be talking to you about some of our Lamin-x products that can be used for an industrial application as opposed to an automotive application. Starting off with our Lamin-x Privacy Film, If you have a window, a door, or maybe a whole wall of glass, and you would like to cover that window for just a little bit of privacy, our Lamin-x privacy film might be the solution for you. Our Lamin-x privacy film is a non-adhesive backed piece of …

Hey everyone Lucas at Lamin-x. If your door sill on your vehicle is scratched up from years of carelessly getting in and out of your vehicle then our Lamin-x Door Sill Guards might be the answer for you. Our Lamin-x Door Sill Guards are a thick, yet invisible, layer of film that protects your door sill from any scratches as you're entering or exiting your vehicle. Today I'm going to show you how to install this product. Let's go. To start you will want to clean the area using a …

Hey everyone Lucas at Lamin-x. Car door edge paint chips are frustrating for many vehicle owners. If you are concerned about opening your doors in a tight parking lot or even your own garage, and potentially chipping the areas around your car door, then our Lamin-x Door Edge Guards are the perfect solution for you.  These strips are adhesive backed and made for a super easy peel and stick installation that can be done in minutes. To start, you just want to clean the edge of …

Hey everyone Lucas at Lamin-x. I'm going to be showing you how to install our  Lamin-x fuel door guards on my 2021 Subaru WRX. Let's start.  You just want to clean the fuel door using some water and a soft cloth to remove any dust, lint, or debris because you don't want that to get trapped underneath the adhesive. As we install remove your pre-cut fuel door guard from the liner keeping track of which side is up and which side is down.  Our pre-cuts do req …

Hey everyone Lucas at Lamin-x, and today we have this Audi q7 Quattro in the shop, and I'm going to be showing you guys how to install Lamin-x pre-cut kits on the headlights, turn signals, and fog lights of this vehicle. Let's get started Starting with the headlight, we're just going to clean the surface of the light from any dust, dirt, or lint that we don't want to get trapped underneath the adhesive as we install the Lamin-x. Then we're going to gently mist the outside o …